กรณีต้องการติดต่อทาง LINE@ กรุณาเพิ่มเพื่อนด้วย LINE ID : @warf
Advertsement
Arduino Raspberry Pi Zigbee/802.15.4 Sensors Robotics LCDs

USB Weather Board v1

1,800.00 THB

ราคาดังกล่าวรวมภาษีมูค่าเพิ่ม 7% เรียบร้อยแล้ว

Facebook Share << คลิ๊ก Share
Part No. : ELE-SP160660512
Manufacture No. : SEN-08765
จำนวนในสต็อก : 1
ต้องการสั่งซื้อจำนวน
OR
ชำระเงิน PayPal แบบใหม่
ช่วยให้คุณซื้อสินค้าได้รวดเร็วและง่ายยิ่งกว่าเดิม
เพิ่มเพื่อน

รายละเอียดสินค้า: USB Weather Board v1

We take the sensitive SCP1000 barometric pressure sensor, match it with a sensitive SHT15 humidity sensor, and we give you weather over USB! Ok, so it doesn't really predict the weather, but you can immediately tell what the current pressure, humidity, and temperature is. Graphed over time you can watch weather fronts move in and the rain come down.

Serial output is a single visible ASCII string at 9600bps.

There is a footprint and switch for 'RF'. This unit can be powered from our large solar cell and data can be transmitted via our BlueSMiRF wireless modem! All you need now is a greenhouse to monitor.

Features:

  •   - Powered over USB or externally
  •   - Absolute barometric pressure accurate within +/-150 Pascal
  •   - Relative humidity accurate within +/-2%
  •   - Temperature accurate within +/-0.3 degrees C
  •   - Serial output 9600bps 8-N-1
  •   - Measurement rate of 1Hz

ไฟล์ดาวน์โหลด: USB Weather Board v1

downloads USB Weather Datasheet : Download
downloads USB Weather Schematic : Download
downloads USB Weather Dimensional : Download

ความคิดเห็นผู้ใช้งาน: USB Weather Board v1

แสดงความคิดเห็น:

เข้าสู่ระบบสมาชิก ก่อนแสดงความคิดเห็น.
ได้รับการรับรองธุรกิจพาณิชย์อิเล็กทรอนิคส์
mce-lab
How to pay
Cards We Accept เลขทะเบียนพาณิชย์อิเล็กทรอนิกส์