กรณีต้องการติดต่อทางไลน์กรุณาเพิ่มเพื่อนด้วยไลน์ ID : @warf
Advertsement
Arduino Raspberry Pi Zigbee/802.15.4 Sensors Robotics LCDs

USB Motor Controller with Feedback

3,690.00 THB

ราคาดังกล่าวรวมภาษีมูค่าเพิ่ม 7% เรียบร้อยแล้ว

Facebook Share << คลิ๊ก Share
Part No. : ELE-WA451655226
Manufacture No. : 1393
จำนวนในสต็อก : 4
ต้องการสั่งซื้อจำนวน
OR
ชำระเงิน PayPal แบบใหม่
ช่วยให้คุณซื้อสินค้าได้รวดเร็วและง่ายยิ่งกว่าเดิม
เพิ่มเพื่อน

รายละเอียดสินค้า: USB Motor Controller with Feedback

The powerful jrk 12v12 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used as an open-loop speed control or for closed-loop speed or position control. The continuous output current is approximately 12 A (30 A max) and the operating range of 6–16 V (with transient protection up to 40 V).


Overview

The jrk 12v12 is a versatile, general-purpose motor controller that supports a variety of interfaces, including USB. The 6 V to 16 V operating range and high continuous output current of 12 A (30 A peak) allow this board to control many medium-sized DC brushed motors. Analog voltage and tachometer (frequency) feedback options allow quick implementation of closed-loop servo systems, and a free configuration utility (for Windows 7, Vista, or Windows XP) allows easy calibration and configuration through the USB port.

 

Key improvements over competing products and earlier Pololu motor controllers with feedback include:

  •     - USB connectivity with emulated serial (COM) port allows direct motor control from a PC.
  •     - Ultrasonic PWM to eliminate switching-induced motor shaft hum or whine.
  •     - Robust, high-speed communication protocol with user-configurable error condition response.
  •     - High internal resolution (12 bits) for smooth and flexible calibration to various input and feedback devices.
  •     - Current sensing and limiting.
  •     - Reversed power protection.
  •     - Field-upgradeable firmware.


Main Features of the Jrk 12v12

  •     - Simple bidirectional control of one DC brush motor.
  •     - 6 V to 16 V operating supply range.
  •     - 12 A maximum continuous current output (30 A peak).
  •     - Four communication or control options:

    •          - USB interface for direct connection to a PC.
    •          - Full-duplex, TTL-level asynchronous serial interface for direct connection to microcontrollers or other embedded controllers.
    •          - Hobby radio control (RC) pulse width (PWM) interface for direct connection to an RC receiver or RC servo controller.
    •          - 0–5 V analog voltage interface for direct connection to potentiometers and analog joysticks.
  •     - Two closed-loop feedback options:
    •          - 0–5 V analog voltage.
    •          - Frequency/tachometer digital input up to 2 MHz with 1 ms PID period.
    • (Open-loop control with no feedback also available.)Simple configuration and calibration over USB with free configuration program (Windows 7, Vista, and Windows XP compatible).
  •     - Configurable parameters include:

    •          - PID period and PID constants (feedback tuning parameters).
    •          - Maximum current.
    •          - Maximum duty cycle.
    •          - Maximum acceleration.
    •          - Error response.
    •          - Input calibration (learning) for analog and RC control.
  •     - Optional CRC error detection eliminates communication errors caused by noise or software faults.
  •     - Reversed power protection.
  •     - Field-upgradeable firmware.
  •     - Optional feedback potentiometer disconnect detection.


Specifications

    - Motor channels:

1

    - Operating voltage:

6 – 16 V

    - Continuous output current:

12 A

    - Peak output current:

30 A

    - Auto-detect baud rate range:

300 – 115,200 bps

    - Available fixed baud rates:

300 – 115,200 bps

    - Available PWM frequencies:

20 kHz, 5 kHz

    - Reverse voltage protection?:

Yes

    - USB connector style:

USB Mini-B

 

The jrk 12v12 is the larger of two jrk motor controllers. For a lower-power version that has a wider operating voltage range, see the jrk 21v3.


Dimensions
    - Size:1.35" x 1.85"
    - Weight:0.5 oz


General specifications
    - Motor driver:VNH2SP30
    - Motor channels:1
    - Control interface:USB; non-inverted TTL serial;
    - RC servo pulses;analog voltage1
    - Minimum operating voltage:6 V
    - Maximum operating voltage:16 V
    - Continuous output current per channel:12 A
    - Peak output current per channel:30 A
    - Current sense:  0.13 V/A2
    - Maximum PWM frequency:20 kHz
    - Minimum logic voltage:4 V3
    - Maximum logic voltage:5 V
    - Reverse voltage protection?:Y

ไฟล์ดาวน์โหลด: USB Motor Controller with Feedback

downloads jrk_motor_controller.pdf : Download

ความคิดเห็นผู้ใช้งาน: USB Motor Controller with Feedback

แสดงความคิดเห็น:

เข้าสู่ระบบสมาชิก ก่อนแสดงความคิดเห็น.
ได้รับการรับรองธุรกิจพาณิชย์อิเล็กทรอนิคส์
mce-lab
How to pay
Cards We Accept เลขทะเบียนพาณิชย์อิเล็กทรอนิกส์