กรณีต้องการติดต่อทางไลน์กรุณาเพิ่มเพื่อนด้วยไลน์ ID : @warf
Advertsement
Arduino Raspberry Pi Zigbee/802.15.4 Sensors Robotics LCDs

Propeller C3

5,250.00 THB

ราคาดังกล่าวรวมภาษีมูค่าเพิ่ม 7% เรียบร้อยแล้ว

Facebook Share << คลิ๊ก Share
Part No. : ELE-WA542398289
Manufacture No. : 32209
รอสินค้าประมาณ 1-2 สัปดาห์ หลังยืนยันสั่งซื้อ
ต้องการสั่งซื้อจำนวน
OR
ชำระเงิน PayPal แบบใหม่
ช่วยให้คุณซื้อสินค้าได้รวดเร็วและง่ายยิ่งกว่าเดิม
เพิ่มเพื่อน

รายละเอียดสินค้า: Propeller C3

The C3 is a true “Credit-Card–sized Computer” that augments the Propeller chip with a number of onboard peripherals to facilitate large scale and complex applications.


Designed in cooperation with Nurve Networks LLC and André LaMothe, the Propeller C3 is the newest Propeller-based application platform from Parallax. Ready to support a wide array of peripherals, this system is ideal for industrial control, monitoring systems, high-level languages, robotics, gaming, and more.


The C3 was designed to be compatible with other Propeller-based development boards such as the Propeller Demo Board and the HYDRA, so porting applications is a snap. Additionally, the C3 uses a novel SPI bus design that allows all the onboard peripherals to be accessed with a single SPI bus (3 signals) along with chip-select logic (2 signals) that supports up to 8 devices in total. Thus, the IO impact of all the onboard peripherals is minimal.


Key Features:
  - Multicore Propeller P8X32A-Q44 with 5.00 MHz socketed crystal to upgrade for over-clocking experiments
  - 64 KB Propeller boot EEPROM holds boot image plus 32 KB extra for data
  - Supports USB or external wall adapter power sources for convenience
  - (4) Break-away mounting tabs, removable if not needed
  - Slick black and white industrial design sure to be the envy of all your friends


Application Ideas:
  - Industrial control
  - Monitoring systems
  - Gaming
  - Experimentation


Details
  - Open source hardware & software design
  - Dual high-current 1.5 A, 3.3/5 V voltage regulators with heavy filtering
  - VGA port with multiplexing logic to reuse IO’s
  - RCA Video/Audio ports for NTSC/PAL composite video
  - PS/2 port for keyboard or mouse
  - 1 MB SPI FLASH memory
  - 2-channel Microchip MCP3202 SPI A/D converter with 12-bit resolution
  - (2) Microchip 32K x 8 bit SPI SRAMs
  - MicroSD card w/SPI interface
  - (4) 3-wire servo port headers to directly drive servos from the Propeller
  - Ultra-compact credit-card–sized PCB footprint
  - Power requirements: 7.5–12 VDC, 300+ mA 2.1mm center-positive supply; OR power via high-power USB, hub port preferred
  - Communication/Interface: USB, GPIO, microSD card
  - Dimensions: (without tabs) 3.0 x 2.175” (75.9 x 55.2 mm)
  - Operating temp range: -40 to +185 °F (-40 to +85 °C)


Note: USB A to Mini B Cable required for programming and USB power (#805-00006), not included. 9 V, 300 mA minimum power supply recommended (#750-00008) not included. Caution: Do not connect to USB and external power at the same time.

ความคิดเห็นผู้ใช้งาน: Propeller C3

แสดงความคิดเห็น:

เข้าสู่ระบบสมาชิก ก่อนแสดงความคิดเห็น.
ได้รับการรับรองธุรกิจพาณิชย์อิเล็กทรอนิคส์
mce-lab
How to pay
Cards We Accept เลขทะเบียนพาณิชย์อิเล็กทรอนิกส์