กรณีต้องการติดต่อทางไลน์กรุณาเพิ่มเพื่อนด้วยไลน์ ID : @warf
Advertsement
Arduino Raspberry Pi Zigbee/802.15.4 Sensors Robotics LCDs

Port103V Development Board

1,950.00 THB

ราคาดังกล่าวรวมภาษีมูค่าเพิ่ม 7% เรียบร้อยแล้ว

Facebook Share << คลิ๊ก Share
Part No. : ELE-WA070216821
Manufacture No. : Port103V
จำนวนในสต็อก : 3
ต้องการสั่งซื้อจำนวน
OR
ชำระเงิน PayPal แบบใหม่
ช่วยให้คุณซื้อสินค้าได้รวดเร็วและง่ายยิ่งกว่าเดิม
เพิ่มเพื่อน

รายละเอียดสินค้า: Port103V Development Board

Port103V is a STM32 development board that features a STM32F103VET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

 

Note: Optional accessory boards are NOT included in the price

 

 

1.STM32F103VET6: the high performance STM32 MCU which features 
  - Core: ARM Cortex-M3 32-bit RISC 
  - Operating Frequency: 72MHz, 1.25 DMIPS/MHz 
  - Operating Voltage: 2-3.6V 
  - Package: LQFP100 
  - I/Os: 80 
  - Memories: 512K Flash, 64K RAM (the highest specification in STM32F103V series) 
  - Communication Interfaces: 3xSPI, 5xUSART, 2xI2S, 2xI2C, 1xFSMC, 1xLCD, 1xSDIO, 1xUSB, 1xCAN 
  - AD & DA converters: 3xAD(12bit, 1μs, shares 16 channels); 2xDA(12bit) 
  - Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2.AMS1117-3.3V: 3.3V voltage regulator
3.Power indicator
4.LEDs: Convenient for indicating I/O status or program debugging running state
5.Reset button
6.User keys
7.Joystick: five positions
8.8M crystal oscillator: enables the MCU run at 72M frequency by frequency multiplication
9.32.768K crystal, used for internal RTC, also supports clock calibration
10.JTAG/SWD interface: for debugging/programming
11.USB connector, used for establishing USB communication between PC and the STM32 development board
12.USART1 connector, supports ISP (In-System Programming) through USART1, as well as system signal output
13.IO expander, all the MCU pins are accessible on expansion connectors for further expansion
14.Power input/output header, 5V/3.3V, usually used for power output, or common ground with other user board
15.5V DC power jack
16.Boot mode selection: for configuring the BOOT0 and BOOT1 pins
17.Power supply switch, powered from 5V DC jack or USB connection
18.USB enable jumper 
  - Short the jumper to enable the PC auto detection while USB connecting 
  - Open the jumper to disable
19.VBAT selection jumper 
  - Short the jumper to use system power supply 
  - Open the jumper to connect the VBAT to external power, such as battery
20.VREF jumper 
  - Short the jumper to connect VREF+/VREF- respectively to VCC/GND 
  - Open the jumper to connect VREF+/VREF- to other custom pins via jumper wires
21.User LEDs jumper 
  - Short the jumper to connect to I/Os that used in example code 
  - Open the jumper to connect to other custom pins via jumper wires
22.User keys jumper 
  - Short the jumper to connect to I/Os that used in example code 
  - Open the jumper to connect to other custom pins via jumper wires
23.Joystick jumper 
  - Short the jumper to connect to I/Os that used in example code 
  - Open the jumper to connect to other custom pins via jumper wires


Note:
  - Accessory board and programmer/debugger in the photos are NOT included in the price.
  - Port103V supports programming through USART port without programmer.
  - Port103V provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required.

 

Package Contains
  - Port103V Development Board x 1
  - USB type A to Mini-B cable x 1
  - USB Power Cable x 1
  - 4-pin wire x 2
  - 2-pin wire x 2
  - User Guide CD x 1

ความคิดเห็นผู้ใช้งาน: Port103V Development Board

แสดงความคิดเห็น:

เข้าสู่ระบบสมาชิก ก่อนแสดงความคิดเห็น.
ได้รับการรับรองธุรกิจพาณิชย์อิเล็กทรอนิคส์
mce-lab
How to pay
Cards We Accept เลขทะเบียนพาณิชย์อิเล็กทรอนิกส์