กรณีต้องการติดต่อทางไลน์กรุณาเพิ่มเพื่อนด้วยไลน์ ID : @warf
Advertsement
Arduino Raspberry Pi Zigbee/802.15.4 Sensors Robotics LCDs

JTAG USB OCD Programmer/Debugger for ARM processors

3,250.00 THB

ราคาดังกล่าวรวมภาษีมูค่าเพิ่ม 7% เรียบร้อยแล้ว

Facebook Share << คลิ๊ก Share
Part No. : ELE-SP130690402
Manufacture No. : PGM-07834
รอสินค้าประมาณ 1-2 สัปดาห์ หลังยืนยันสั่งซื้อ
ต้องการสั่งซื้อจำนวน
OR
ชำระเงิน PayPal แบบใหม่
ช่วยให้คุณซื้อสินค้าได้รวดเร็วและง่ายยิ่งกว่าเดิม
เพิ่มเพื่อน

รายละเอียดสินค้า: JTAG USB OCD Programmer/Debugger for ARM processors

This is the mother of all JTAG Programmers for ARMs - and it's about 1/10th the price of other programmer/debuggers with the same functionality!

 

Olimex cannot ship us enough units! We are very sorry if you received an auto-notify message and were not able to purchase a unit. We are trying to get many more units, but Olimex is not able to provide them at this time.

 

Features:

  - First on market three-in-one USB JTAG debugger - offers JTAG + RS232 (full modem signals supported) port + power supply all in one compact device

  - Fast speed USB 2.0 JTAG dongle interface, can be used with all ARM devices for programming and debugging.

  - Uses ARM's standard 2x10 pin JTAG connector

  - Supports ARM targets working in voltage range 2.0 – 5.0 V DC

  - Software supported by OpenOCD (open source) debugger

  - adds virtual RS232 port to your computer with all modem signals like: DTR, DSR, DCD, RTS, CTS, Rx, Tx

  - Can be used as power supply to your target board with three jumper selectable power supplies: 5V 9V and 12VDC, USB source current is limited with resetable fuse at 300mA, at the different output voltage the maximum current is different: 5V/200mA, 9V/100mA, 12V/70mA, note that this also depend on your USB host current capabilities, if other USB devices are attached to your computer or if the laptop is running on batteries these figures may be different and depend on your computer USB host.

  - Comes with CD with Windows installer for full featured and open source tools as alternative to the commercial ARM development packages: GCC C compiler, openOCD debugger and Eclipse IDE.

 

Dimensions: 50x40 mm (2x1.6") + 20 cm (8") JTAG cable + 30 cm (12") power supply cable

 

Software:

  - Olimex's ARM GCC for Windows Dummies install CD - installs on your computer WinARM + OpenOCD debugger + Eclipse for out of the box development with the open source GNU C compiler and OpenOCD debugger, supports flash loading on LPC and external flash for LPC-H2214, LPC-H2294, with make examples for different ARM controllers.

  - openOCD open source debugger from Dominic Rath for debugging with Insight/GDB.

  - WinARM - easy to install open source GCC toolchain by Martin Thomas. We are working on CD install package for WinArm+OpenOCD+ARM-USB-OCD support

  - For the moment the only supported package is GCC C compiler + openOCD debugger + Eclipse IDE. Olimex can provide the necessary information and cooperate with interested parties if they want to add low cost USB debugger support to their C compilers and IDEs.

Olimex cannot ship us enough units! We are very sorry if you received an auto-notify message and were not able to purchase a unit. We are trying to get many more units, but Olimex is not able to provide them at this time.

ไฟล์ดาวน์โหลด: JTAG USB OCD Programmer/Debugger for ARM processors

downloads ARM-USB-OCD : Download

ความคิดเห็นผู้ใช้งาน: JTAG USB OCD Programmer/Debugger for ARM processors

แสดงความคิดเห็น:

เข้าสู่ระบบสมาชิก ก่อนแสดงความคิดเห็น.
ได้รับการรับรองธุรกิจพาณิชย์อิเล็กทรอนิคส์
mce-lab
How to pay
Cards We Accept เลขทะเบียนพาณิชย์อิเล็กทรอนิกส์