Development board for the LPC2124 processor.

• MCU: LPC2124 16/32 bit ARM7TDMI-SÖ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• Single power supply: +5VDC required
• Power supply status LED
• Power supply filtering capacitors
• Two channel RS232 interface
• RESET circuit with external control of Philips ISP utility via RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET control by RS232
• 10 MHz crystal
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print

Dimensions:

• Overall: 3.0x2.2" (76x55 mm)
• Space between the pin rows: 1.9" (48.26 mm)